Find Clear Silicone Adhesive Coating, Silicone Adhesive Clear Coating, Clear Rtv Silicone Coating on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Electronic Pouring Silicone Sealant > Electronic Coating Adhesive three-proof sealant

Electronic Coating Adhesive three-proof sealant

Electronic Coating Adhesive three-proof sealant

    Min. Order: 1000 Piece/Pieces
    Packaging: carton
    Productivity: 10000pcs
    Brand: Shengtang
    Transportation: Air,Ocean,Land,Express,Others
    Place of Origin: China
    Supply Ability: 10000pcs
    Certificate: ROSH,REACH,Halogen free, sulfur free
    HS Code: 3214109000
    Port: Jiangmen

Basic Info

Model No.: ST-1006-1

Product Description

Electronic Coating Adhesive ST-1006-1

Product Description

1. The product picture is as above

Electronic Coating Adhesive

2. Product features and applications

This product is a single component room temperature curing, transparent, Liquid Silicone products, easy to use, can be sprayed, impregnated, brushed and Other methods of construction, can be diluted with diluent (toluene); after curing has strong adhesion, friction resistance, aging resistance and other properties; after use can play the role of moisture-proof, waterproof, corrosion-proof insulation protection; non-toxic, non-polluting, in line with the requirements of the European Union ROHS environmental protection instructions.

It is mainly used for coating protection of electrical and electronic products, led display screens and circuit boards, protective layer for flexible, rigid circuit board and various circuits.

3. Main technical datas


Test Standard

Standard values

Model no.




Visual inspection

Translucent liquid

Surface curing timemin








Hardness / Shore A 20



Tensile strength /MPa



Volume resistivity /Ω.cm



Breakdown voltage KV/mm



Dielectric constant60Hz



(non-standard value)

Notes: The above performance data are based in 25±2 ℃ and relative humidity 50 ± 5%.

4. How to Use

1. Clean the surface: clean the coated surface, remove dust and oil, otherwise affect abnormal adhesion;

2. Cover connectors, switches, sockets, plug boards and other areas;

3. According to the actual use situation, spraying, dipping and brush and other glue application techniques can be selected. If the viscosity is too high, an appropriate amount of dilutions can be added, diluted and deployed into different viscosity for construction.

3. Curing: Place the coated parts in air and solidify or warm.

4. After pouring out the coating in the bucket, wipe off the excess paint at the mouth of the bucket, tighten the bottle cap, and keep it in a cool shade after sealing.

6. After the construction, the hair brush and spray gun shall be cleaned with diluent in time for the next use.

5. Storage and Transportation

1. Keep it away from the children.If accidentally contact skin, wipe clean and rinse with water; if accidentally contact eyes, rinse with water and go to the hospital for examination.

2. The product shall be sealed and stored in a cool, dry and ventilated place (-10℃ ~28℃) to prevent rain and sun exposure.Prevent the fumigation of acid and alkali liquid, and should isolate the fire source, away from the heat source, the storage period is 6 months.

3. After the product is opened, it should be exhausted as soon as possible. The unused product should be strictly sealed in a safe place.

4. The dilute solvent used in silicone shall not contain water, sulfur compounds, pyridine and other impurities, otherwise it will affect the adhesion, dryness and other properties of the silicone paint film.

5. In the processing process of silicone, there will be methanol and other flammable and explosive solvents volatile out. Pay attention should be paid to strengthen the operation site ventilation, pay attention to fire prevention, and strictly cut off the fire sources.Operators should pay attention to labor protection.

6. In the processing process of silicone, the equipment and appliances used must be clean, and strictly prevent the dust and foreign body from mixing and bringing in, otherwise the electrical insulation performance of the products will be reduced.

7. Compounds such as water and gas, acid, alkali, organic acids and amines accelerate the silicone.Silicone resin shall be strictly isolated from these substances.

8. Sunprotection, fire prevention, moisture-proof, acid-alkali prevention and salt in product transportation, and the temperature is less than 50℃.Transportation according to flammable goods.

6. Packing

This product is packed in 1L/iron jar.

There are much more categories in our website, such as Thermal paste, thermal paste for cpu, Thermal Grease, thermal paste for cpu,Thermal Pad, best thermal pads, UV Curing Adhesive, UV glue, Potting Glue, Electrical potting compound, Epoxy Resin Adhesive. And there are more items are not showing on the website, please contact us directly for more information.

WARM REMINDER: Thank you for your trust and support of our products. Due to the diversity of practical applications, we cannot grasp the application conditions. Therefore, please have a test before confirm if it meets your requirements and avoid unnecessary waste and loss. We do not guarantee the issues under specific conditions, do not assume any direct, indirect or accidental responsibility. If you have any questions, please contact us, and we will make a solution for you. Service hotline: 400 168 3323

Guangdong Shengtang New Material & Technology Co.,Ltd.

  • 1
  • 2
  • 3
  • 4
  • 5
 Guangdong Shengtang New Material Technology Co., Ltd. is a technology-based manufacturing enterprise which focuses on technical analysis and product development of glue used in electronic and electrical appliances and lighting industry. Founded in 2006, is a national high-tech enterprise, our products include single component silicone, potting glue, thermal glue, UV glue, epoxy adhesive, adhesive and Other series, applications from lighting to new energy, automotive, electronics and other industries. The marketing service network covers all parts of the country and many countries in Southeast Asia. Shengtang has R&D centers in Jiangmen city, our headquarter, as well as in Guangzhou city, with high standards, advanced equipment chemical analysis, formulation research and development, application verification and other laboratories. We has a strong development team composed of senior engineers in synthetic research, formulation development, application analysis and other fields, focusing on technology research and independent innovation, prosperous Tang enterprises and brands to win customers and industry reputation.

Company Info

  • Company Name: Guangdong Shengtang New Material & Technology Co.,Ltd.
  • Representative: TangShuangWu
  • Product/Service: One-Component RTV Silicone Sealant , Thermal Paste , Thermal Grease , UV Curing Adhesive , Potting Glue , Epoxy Resin Adhesive
  • Capital (Million US $): 18000000RMB
  • Year Established: 2008
  • Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
  • Export Percentage: 1% - 10%
  • Total Annual Purchase Volume (Million US $): Below US$1 Million
  • No. of Production Lines: 10
  • No. of R&D Staff: 11 -20 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 10,000-30,000 square meters
  • Factory Location: N0.40, Gaoxin East Road, Jianghai District, Jiangmen city, Guangdong Province, China
  • Contact Person: Ms. Sophia Chen
  • Tel: +86-0750-18138996911
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters